Intermec printer dip switch settings |
The following are the actual dip switch settings for the Intermec printer. You do not need to change the switch settings unless you are unable to connect an Intermec printer.
Top Row
9600 Baud (Switches 1,2,3 set to 1,0,0)
Even Parity (Switches 4,5 set to 0,0)
Word length 7 (Switch 6 set to 0)
Switches 7 and 8 are not used
Bottom Row
Multi-Drop Address set to "A" (Switches 1,2,3,4,5 set to 0,0,0,0,0)
Protocol to XON/XOFF (Switch 6 set to 0)
XON/XOFF set to No Status (Switch 7 set to 0)
Media type is set to TTR (Switch 8 set to 1). The media type switch is not on the default, the default is 0 for DT media.