Intermec printer dip switch settings

The dip switch settings for the Intermec printer are as follows. You should not need them if you follow the How do I set up an Intermec printer? directions.

Top Row

9600 Baud (Switches 1, 2, 3 set to 1, 0, 0)

Even Parity (Switches 4, 5 set to 0, 0)

Word length 7 (Switch 6 set to 0)

Switches 7 and 8 are not used

Bottom Row

Multi-Drop Address set to "A" (Switches 1 ,2, 3, 4, 5 set to 0, 0, 0, 0, 0)

Protocol set to XON/XOFF (Switch 6 set to 0)

XON/XOFF set to No Status (Switch 7 set to 0)

Media type set to TTR (Switch 8 set to 1)

The media type switch is not on the default. The default is 0 for DT media.