Back | Forward

To repair a serialized part internally:

Step 1.  Go to the Data -> Parts Repair -> Internal Rebuilds screen.

Step 2.  Click the Prepare for Update button .

Step 3.   Enter information in the applicable fields, including those on the Serial Numbers tab.

• Note: If the part being repaired is serialized, it must have a status of AWAITING REBUILD (specified on the Data -> Parts Items -> Serialized Parts screen). If it does not, the system creates a separate record to reflect this status. A serialized part cannot be used to rebuild a part.

Step 4.  Click the Process button .

To repair a serialized part externally (i.e., send it out for repair):

Step 1.  Go to the Data -> Parts Repair -> External Rebuilds screen.

Step 2.  Click the Prepare for Update button .

Step 3.   Enter information in the applicable fields, including those on the Line Items tab.

• Note: If the part being repaired is serialized, it must have a status of AWAITING REBUILD (specified on the Data -> Parts Items -> Serialized Parts screen). If the line item status is set to CLOSED and no parts were received, the part status is set to SCRAPPED.

Step 4.  Click the Process button .