More Info |
The More Info tab enables you to configure notification message settings for island control units (ICUs).
Tip: To limit the display of information in the grid and maximize performance, use the filter. You can sort on site ID, ICU number, and ICU type.
The fields in the top section of this tab define the data that displays.
Site ID
Identifier of the tank site currently selected in the grid or that you are defining. This field is required. Must be a valid fueling site location. This field has a list box. The site description displays to the right of the ID.
Site IDs are defined on the Data -> Fuel/Fluid Tanks -> Setup -> Fueling Sites screen.
ICU number
Identifier of the island control unit. This field is required. Must be 1 or higher. The site ID and ICU number combination must be unique.
Prompt ICU to ask for setup parameters
Click the Prompt ICU to ask for setup parameters button to obtain setup parameters from the ICU.
The bottom section of the tab enables you to define the ICU display format and enable notification messages. All fields are optional.
ICU display format
Number of characters per line: The number of characters allowed per line. Defaults to 0.
Number of lines: The number of lines allowed. Defaults to 0.
Enable equipment notification messages: If this field has a check, equipment notification messages are allowed.
Send equipment service status: If this field has a check, an equipment service status is sent.
Send health check status notification message: If this field has a check, a health check status is sent.
Health check interval minutes: The number of minutes between check intervals.
Last health check update
Date and time of the last health check update
Last transaction
Date and time of the last transaction.
Symptom code length
Length of symptom code. Maximum field length is two characters. Must be greater than or equal to zero (0). This field is optional.
Position code length
Length of position code. Maximum field length is two characters. Must be greater than or equal to zero (0). This field is optional.
Repair reason ID
Identifier of the repair reason. This field is optional.
Send to pending if meter less than current reading
Check this box to enable this setting. When enabled, if the current meter reading of an asset is less than the last record, this transaction will be set to pending status, and sent to the error queue for personal review and handling.
Send to pending if meter reading equals zero
Check this box if you want to stop pending transactions if the meter equals zero. The transaction is then sent to the error queue for personal handling.
Token/GUID
Enter the token or GUID number for the Island Control Unit. If the This ID can be used for authentication purposes. Maximum length of this field is 40 characters. If the Enable encryption option is enabled on the Fuel/Fluid Tank - Setup - Options screen, this field is required. This same Token/GUID must be set on the ICU in the xml.INI file in the Global section area authorizationGUID=[Enter Token/GUID here].