Segments |
Note: Non-linear assets do not display on this screen. Use the Data -> Equipment Units -> Fleet Equipment screen.
The Segments screen enables you to define segment IDs.
Tip: You cannot delete segments that are being used on current linear assets or that are being used on open linear work orders.
The field in the top section of the Basic Info tab displays the segment ID. This field is required.
Segment ID
Identifier of the segment. Must be unique. The maximum field length is 20 characters.
Data in the fields in the bottom section of this tab define basic information about the segment. Unless otherwise indicated, these fields are required.
Description
Name of the segment.
Length
Length of the segment.
Owner
Name of the segment's owner. This field is optional.
Beginning marker ID
Identifier of the first marker in the segment. This field has a list box. The marker description displays in the unlabeled field to the right. Valid markers must have an offset from the segment start of 0. This field is optional.
Tip: Marker IDs are defined on the Data -> Equipment Units -> Linear Assets -> Setup -> Markers screen.
Ending marker ID
Identifier of the ending marker in the segment. This field has a list box. The marker description displays in the unlabeled field to the right. Valid markers must have an offset equal to the segment length. Optional.
Line ID
Identifier of the line. If entering a new ID, it must be unique and a maximum of 20 characters. This field has a list box of existing IDs. The ID description displays in the field to the right. Line IDs are recorded on the Data -> Equipment Units -> Linear Assets -> Setup -> Lines screen.
Color to show on ActionMap
Color that displays on ActionMap. This field has a list box. This field is optional.
Shape ID
Identifier of the shape. This field has a list box. The ID description displays in the field to the right. This field is optional. Shapes are defined on the Data -> Equipment Units -> Linear Assets -> Setup -> Shapes screen.
Map symbology ID
Enter the symbology ID of the icon you want associated with the segment. This field is optional, but if entered, must be a valid entry. The field pulls the icon associated with the ID from the Mapping Symbology screen.