Files

The Files tab enables you to view and insert links to files associated with test results. If there are notes associated with the results, this tab displays in the alert color specified on Preferences -> Color Setup.. You can use the % wildcard character to filter the results of choice-lists on this screen. The Test Results screen supports location-level access control, so you must belong to a user group with the applicable authorizations to make changes or updates.

Note: Test Element Validation: If there is a check in the Validate test element values upon entry field on the Options tab of the Data -> Shop Activity -> Setup -> Options screen and you enter a value on this tab that is not allowed, you must delete it before the record may be saved. In addition, if required data has not been entered, you must enter it before the record may be saved.
If the Validate test element values upon entry field is blank, these requirements are not enforced until you close the test result.
Tip: To limit the display of information in the grid and maximize performance, use the filter. You can sort on test ID, work order information, status, part ID/suffix, segment ID, to/from marker ID, and to/from offset, among other values. If you specify a range, any record that crosses any part of that range will be displayed. Search results are limited to data for locations to which the user group has been granted access.

Detail View Header

The fields in the top section of this tab define the data that displays.

Test ID

Sequential identifier for the test run selected in the grid.

Detail View

The Files screen group lists the data files associated with the test results. These fields are optional.

Delete

To delete the entries in the fields to the right, place a check in this field and click Save.

Test element ID

The identifier of the tested element. This ID must be valid for the test type (not required if entering a file against a header).

Path and file name

Navigation path and file name of the data file associated with the test result. This is useful if you want to associate a procedures document, diagram, or schematic with the result. The field allows both uppercase and lowercase letters to support operating systems that are case-sensitive. Maximum field length is 255 characters; the first 85 display in the field. This field has a file launch button .

Description

Description of the data file. Maximum field length is 50 characters, and all display in the field.