Usage Info |
Note: Non-linear assets do not display on this screen. Use the Data -> Equipment Units -> Fleet Equipment screen.
The Usage Info tab enables you to update or review a linear asset's usage information.
Tip: To limit the display of information in the grid and maximize performance, use the filter. You can sort on equipment ID, model information, class information, segment ID, to/from marker ID, and to/from offset, among other values. The list of searchable fields on the filter is extensive; use the scroll bar to view them all. If you specify a range, any record that crosses any part of that range will be displayed.
The Primary Information screen supports location-level access control, so you must belong to a user group with the applicable authorizations to make changes or updates.
The field in the top section of this tab defaults from the information entered on the Basic Info tab. The field is read only.
Equipment ID
Identifier of the equipment unit currently selected in the grid. This field has a list box. The equipment unit year, manufacturer, and model display to the right of the ID.
Tip: You can set a zoom button for this field to detect the type of equipment and display the appropriate screen. If you used Administrator Mode to add a zoom button, you will need to use it again to remove your user-defined zoom button for this functionality to work.
Asset type
The type of asset.
Data in the fields in the bottom section of this tab provide additional information about linear asset usage. Unless otherwise indicated, these fields are required.
Equipment class for usage types
Preventive maintenance (PM) program class ID for the linear asset. This field has a list box. The class description displays in the unlabeled field to the right. Equipment classes are defined on the Basic Info tab on the Data -> Equipment Units -> Setup -> Equipment Class -> Primary Information screen.
Note: Unless the meter types are the same on both classes, all related work orders must be closed before a usage class may be changed.
Usage information
Unit of measure associated with the PM program class ID. This field populates automatically when the Equipment class for usage types field is filled. This field is display only.
Latest usage reading
Last usage reading entered for the linear asset, either from this screen or elsewhere in the application. The maximum field length is seven digits. This field is optional.
Latest usage source
Source of the latest usage reading. This field is display only.
Latest usage date
Date and time of the latest usage reading by the usage source. This field is display only.
Life total usage
Lifetime accumulated usage for the linear asset. This field is optional.